The vest bag making machine must be operated by fixed personnel who are proficient in starting and bag making procedures, and can easily debug instruments and change parameters; Mechanical instrument debugging personnel must undergo strict testing by the manufacturer and be proficient in instrument performance, work procedures, operating modes, working status, common fault diagnosis and handling; Unauthorized operation of computer instruments is strictly prohibited. The daily maintenance of the vest bag making machine must ensure that the inside and outside of the computer instrument box are clean and dry; Regularly check that the wiring terminals are not loose or detached. Ensure smooth electrical and gas circuits.
The basic cleaning of the vest bag making machine includes:
1. The measuring part of the vest bag making machine should be cleaned in a timely manner after shutdown, such as packaging sugar, Banlangen granules, salt, etc. It is necessary to ensure that each shift cleans the discharge tray and turntable to prevent corrosion.
2. For the heat sealing device body, it should be cleaned regularly to ensure that the texture of the sealing of the vest bag making machine is clear.
3. The photoelectric tracking light emitting head, also known as the electric eye, should also be cleaned regularly to ensure small errors in cursor tracking.
4. The scattered materials on the material tray need to be cleaned in a timely manner to keep the machine parts clean.
5. Regularly clean the dust inside the electric control box to prevent malfunctions such as poor contact. The newly installed vest bag making machine must inspect and tighten the transmission and moving parts, and refuel for maintenance within one week of use; Regular inspection and maintenance must be carried out every month in the future;
Basic maintenance of vest bag making machine:
1. Regularly check the screws of each part of the packaging machine for vest bag making machine to avoid looseness.
2. The vest bag making machine should pay attention to the waterproof, moisture-proof, anti-corrosion, and rodent resistance of the electrical parts. The electrical control box and wiring terminals should be kept clean to prevent electrical faults.
When the vest bag making machine is stopped, the two heat sealing rollers should be in an open position to prevent damage to the packaging material.
4. Regularly lubricate the gear engagement points, oil injection holes for bearings with seats, and various moving parts of the vest bag making machine with engine oil. When adding lubricating oil, please be careful not to drip oil onto the transmission belt to prevent slipping, loss of rotation, or belt aging and damage.
Precautions for operation and maintenance of vest bag making machine
Although the vest bag making machine is small, it must be regularly maintained and stored by dedicated personnel, and the operator must be familiar with the structure and performance of the machine tool. It is strictly prohibited to overload the use of the round back core bag making machine, and it is not allowed to cut quenched steel materials, hard steel, high-speed steel, alloy steel, castings, and non-metallic materials.
1. The cutting edge of the vest bag making machine should be kept sharp, and if the cutting edge is blunt or damaged, it should be promptly polished or replaced. When multiple people operate, there should be a dedicated person to command and coordinate with each other. It is prohibited to cut two different specifications of materials simultaneously on the vest bag making machine, and overlapping cutting is not allowed.
2. The workpieces cut by the vest bag making machine must be placed smoothly, not stacked too high, and not stacked on the aisle. The leftover materials and waste materials at the edges and corners should be cleaned up in a timely manner to ensure that